Baby Shower Desserts Part 1 - Cabbage Patch Chocolates

You don't need a recipe to make cabbage patch chocolates - just a technique guide to show you the way.  To begin you'll need quite a bit of equipment and ingredients.  There are two sites that I like for supplies - each one has its shortfalls.  The one with the biggest selection is http://www.sugarcraft.com/.  The drawbacks with using sugarcraft are that they are very impersonal - there is no phone number if you have a problem, and if you don't have your order number, you are completely out of luck - they cannot tell you anything about your order without it.  In addition, they are very slow - no inquiries until at least 10 days, and that's when they ship.  From this site, you also cannot order a small quantity of candy eyes, unless you take whatever color they give you (and some of the colors are very funky and not suitable for baby dolls).  They do, however, have a huge selection with photos which makes it easy to see what to buy.  The site that I actually bought the supplies from is: http://www.chocomolds.com/.  They are very personal and friendly, shipped quickly and had a package of 48 eyes.  It is hard to use their site, however, because they don't have any pictures, so you need to know what you want.

Here is what you need:

Baby Face Lolly Chocolate Mold (3 per mold)

Mercken's Peach Wafers (this is very delicious tasting coating- Do not buy Wilton wafers which are yucchy).  If you are filling the molds completely with this, you need 2 ounces per face (you won't use that much but you lose some to hardening on utensils and bowls).  

Dark Chocolate, if filling the centers with it - about 1-1/2 ounce per face.  I used chocolate chips because they were cheaper (Ghirardelli).  If I were making fewer and spending only my money, I would have used bar chocolate.  Bar chocolate tastes better (to me) and is easier to work with because it melts into a thinner state than chocolate chips.

Instant-read thermometer - if you plan on tempering the chocolate

Mercken's Cocoa Dark Wafers (ok tasting - I use it for decorating only) - 1 bag  if you want to paint on dark hair.  You can also paint the hair with real chocolate, but if you don't temper it, it might turn whitish or rainbow-colored.  If you want light brown hair, add brown food color to the peach wafers.  If you want blond, you will need to buy 1 bag of Mercken's Yellow or White Wafers(not super white) and add food coloring to these.  You might also need Paramount Crystals to get the yellow coating to melt ( I didn't need it for the peach wafers).

Candy Eyes - each small package has 48 eyes. Don't forget that you need 2 per face!  You can make your own eyes, but you will need fondant and food coloring to do that.

4-1/2-inch sucker sticks

Petal Dust or something like that in a pink color to brush on the cheeks - I think I bought mine at Michael's, but any place that sells gumpaste supplies will have some. 

Assorted brushes - you'll need some good quality brushes so that the hairs don't come off in the chocolate,

and one cheap, bushy  brush for putting on blush.  The pointy one I use for attaching the eyes and the one on the right I use for brushing blush.  The pointy one was part of a set  of more expensive brushes
by Loew-Cornell. There are two nice pointy brushes in the set.  #1 and #4 370 round and 370 liner.  You'll have to do an Internet search as I don't know where I bought them.

This is also from the Loew-Cornell set. 370 Shader #8.  It's useful if you need to brush on chocolate to spots that you missed.  Also good for fixing errors (more on this later).

Heating Pad  for keeping the chocolate and chocolate wafers melted and at the right temperature.

Small cake decorating spatula - I like the one that is angled (I got mine at Michael's - it's manufactured by the The Ace of Cakes guy, Duff).  It looks larger in the photo, but the blade before it bends is actually only 3-1/2 inches long.

 Tweezers that you use only for food prep.  I bought a special pair from a gumpaste supplier, but you could use regular tweezers as long as they stay in the kitchen!

Full-size muffin papers in various colors - one for each head

Tissue paper for the clothing - about a 5 or 6-inch square for each head

Ribbon - at least 6-inches for each, or more if you want to tie bows

Waxed paper

INSTRUCTIONS

Wrap the heating pad with a dishtowel, and turn it on to low.

 Place no more than 1 pound of the Merckens peach wafers in a microwave-safe bowl ( use a bowl that doesn't retain heat, such as a pyrex dish or a plastic container).  Heat on medium power (5) for 1 minute.  Stir, and continue to heat and stir in 30 second increments on power 5, until the wafers are melted (don't let the coating get hotter than 120 degrees F.).  Set the bowl on the heating pad.

If you're going to fill the entire mold with the coating, do that now, filling each mold right up to the top.  Set the molds in the refrigerator to chill until the coating is completely set- anywhere between 5 -15 minutes.

If you plan to fill the centers with chocolate, you'll need to coat each mold with the peach coating.  There are two methods for coating the mold with chocolate.  I prefer  to spoon in about 1-1/2 teaspoons of the peach coating into each of the 3 holes and then to swirl the chocolate around inside of the molds until they are completely coated.  You'll be doing all three at once.  I like this method best because it spreads the coating evenly and is much faster than painting each cup.

When you use the swirl method, the coating might swirl slightly out of the mold cup.  This is actually good.  It ensures that the entire mold is coated.  Simply wipe off the excess coating with a paper towel or rag.   If you want an extra thin shell, you can hold the mold upside down over a piece of waxed paper and let the excess coating drip out of the mold.

If you have trouble with this method, you can paint each cup individually.  Start by putting in the 1-1/2 teaspoons of coating and then use the 370 Shader #8 brush to paint from this pool of coating.  After you get the whole thing coated, you might have to go back and daub on more chocolate on the spots you missed - you can see a few in the photo below.

 In the below photo you can see that I have missed some spots at the top, too.  These will be especially problematic if you don't notice them, as the dark chocolate and coating might not adhere well and you might get some separation when you try to unmold the chocolates (more on this later).

Make sure that the space where the stick goes is clear of chocolate, as the sticks won't be properly set into the chocolate if there is hardened coating in the stick space.

Place the molds in the refrigerator for no more than 3 minutes to set the shells.  Now you have to decide if you want to temper your chocolate or not.  Untempered chocolate will take much longer to set, will never be as firm as tempered chocolate, and can turn white or streaky when dry.  Since the chocolate will be encased in the coating, the white or streaky color won't show but you'll have to wait a lot longer for each one to set. 

If you do want to temper the chocolate, place about 9 ounces (chips or finely chopped bar chocolate) in a microwave-safe bowl.  Finely chop another 3 ounces of chocolate or set aside another 3 ounces of chips.  Microwave the chocolate on power 5 for 1 minute.  Stir and then reheat the chocolate in 30 second increments on power 3, stirring between each. Use an instant-read thermometer to make sure that the temperature is in the 90-110-degrees F. range.  When all of the chocolate is melted, add the remaining 3 ounces of chocolate and stir and rest until all of the chocolate is melted and the temperature comes down to 84 degrees, but not lower.  Place the bowl back in the microwave and heat for 10 seconds on power 2 to bring the temperature to between 88-90-degrees F.  If the temperature goes about 91 degrees, you have to let it cool back down to 84-degrees, and try again ( you can add more chopped chocolate to get the temperature down a little faster).  If the temperature drops below 84 degrees, you repeat the entire process.  Once you have successfully tempered the chocolate, place the bowl on the heating pad to keep it at the right temperature.  Stir and check the temperature often.

Spoon about 1 to 1-1/2 teaspoons of chocolate into each cup ( I use 3 molds at a time to make 9 babies, and then repeat the whole process, but you can do whatever will fit your refrigerator and counter space), so that the chocolate comes to within 1/16 inch of the top.  Set the lolly sticks in the stick holes. You might need to press down on them to make sure that they are all the way into the space provided for them.

 Place the molds in the refrigerator to set the chocolate.  This will take about 5 minutes if the chocolate has been tempered and 15-25 minutes if the chocolate was not tempered.

Cover the top of the chocolate with 1 final layer of coating.  I find it's easiest to just spread it with a teaspoon.  Make sure that the molds are completely filled up, and then set them back into the refrigerator for about 3 minutes to set the coating.

Let the molds stand at room temperature for a minute before you try to unmold them.  If the coating and chocolate are too cold, the coating will crack when you try and flex the mold to get the chocolate out.  Place a piece of waxed paper on the counter or in a pan onto which you'll unmold the chocolate.  To get them out of the molds, press on the noses of the babies.  If the chocolate don't pop out, let them rest a little more and then try again.  They should pop out of the molds pretty easily.

If you haven't done a good job in sealing in the chocolate, or if they were too cold when you tried to pop them out, part of the shell might stick to the pan and separate from the chocolate.  Don't despair - it can be fixed!

 Just use the decorating spatula (metal) or brush to add a glob of coating  to the chocolate.

 Then heat the spatula in the flame of a gas stove or over the coil of an electric, just for a few seconds to get the spatula warm.  Press the spatula on the glob of chocolate and smooth it out.  You can use your finger to do the final smoothing.

Another problem you can have when the chocolates pop out, is that there is excess chocolate around the edge of each form because you put just a bit too much coating into the mold.

This also gets fixed with a warm spatula - if you look at the photo of the spatula, above, you'll see that's exactly what I'm doing.  Just run the warm spatula around the edge of the form and the little excess tails of coating will melt away.  Again, your finger is the perfect finishing smoother.

You're now ready to do the hair.  You can use that nice tempered chocolate you have warmed on the heating pad, or you can melt some of the cocoa wafers for dark hair, or use one of the other combinations mentioned above, for other colors of hair.  Use the fine pointed brush, above, to brush chocolate onto the curl that is molded into each chocolate.  You can then use your imagination to do other hair styles.  For fine, wispy hair, use an almost dry brush.  If you want some spiky hair sticking out, you will need to let some of the chocolate or dark wafers to start to cool and thicken, otherwise it will be too thin to stand up.

For the eyes, use a fine pointed brush to dot a small glob of melted peach coating in the socket of each eye.  Use tweezers to set the eyes into the sockets, and then press lightly so that the eye will adhere to the melted chocolate.

If you want to make your own eyes, I think it is much easier to use fondant than to pipe royal icing eyes.  Roll fondant into small round balls - they should be smaller than the sockets.  Into the center

of each ball, press in a small colored ball. For the iris, use black food coloring.  Eyes will look more natural if the iris is slightly cut off at the bottom of the eye (not as shown here), so that it gives the suggestion of a lower eye lid.

The last thing to do is to give the cheeks a little blush.  Use the petal or luster dust in a pretty pink color.  Don't put too much on the brush at once.  The dust has a little bit of a glittery effect, but if you put it on sparingly, and brush off any excess, it really gives the babies depth and personality!

For the bonnets, use scizzors to make a slit in the side edge of the muffin papers, and then set the heads into

the bonnets.  You can do the bonnets or the sleep sacks first.

To make the sleep sacks, set the tissue paper square either under the lower third of the head or at the neck.

 Fold in the two sides.

and then tie the ribbon around the top. 

You can also make a wider bottom, so that they look more like sleep sacks.

Voila!  You have now made some of the cutest looking chocolate lollypops in the world!

Baby Shower Desserts

CABBAGE PATCH CHOCOLATES -

ONESIE BUTTER COOKIES WITH FONDANT ICING -

CHOCOLATE AND VANILLA MINI-CUPCAKES WITH BLACKBERRY CASSIS BUTTERCREAM AND ROYAL ICING BOOTIES -

I've been busy baking, as you can see.  The recipes are coming, but they take almost as long to post as they do to create.  Stay with me as I guide you step by step in making these beautiful desserts for your loved ones.

Filled Chocolate Cupcakes - The recipes - revised January 2011

This is an update to this recipe which was put up in September. I was making them again recently (January '11), and realized that there was an error in the ingredient section (probably, because as you can tell from the following text and photo, I had trouble reading my soiled recipe copy).  The gram weight of flour was correct, but the corresponding cup measurements were not.  If you have printed out this recipe, please check the updated ingredients. 

In addition to this, if you read the prior post, you might have noticed that I wasn't happy with how tender the cupcakes were.  This time around, I did some more experimenting and found that using bread flour instead of all-purpose made for a sturdier cupcake, and, I added another egg.  This made the cupcakes firmer, also helped them rise higher and allowed me to get the cupcakes out of the liners more easily.

The following is the original post, with the appropriate corrections made to the ingredients.

----------------

I've been trying to get this post done since the summer, but I had to grab a few minutes late at night to write up my recipes, because the days were filled with BCC Rally auction stuff.  Now that the auction is over, I finally have time to post.  But when I go back to see what I've done, I can hardly read the recipe because it's covered in chocolate! 

That's why you need a CD-rom cookbook (mine, of course).  Because instead of having a cookbook that's covered in chocolate, you can have a few recipe pages that you've printed off, and when you're done, you toss the messy things out!  But now, on to the recipe!

The Cake
The first time I made the cupcakes with Veronica and Jasmine (see Filled Chocolate Cupcakes, Part 1, I used a light version of my Chocolate Layer Cake.  They were delicious, but a bit too tender.  I think they were so tender because we used the maximum amount of milk (3/4 cup) and because we mixed them by hand.  When I made them again, I used just a bit more than the minimum, and they came out much better - a little denser, which held up better for a pick-up type cake.

Makes 42 mini-cupcakes or 12 regular cupcakes

2-1/2 ounces semisweet chocolate, chopped
1 tablespoon oil

1 cup minus 1-1/2 TB (122 grams) bread flour, measured by fluffing, scooping and levelling*
2 tablespoons  unsweetened cocoa powder
3/4 teaspoons baking soda
1/8 teaspoon salt

5 tablespoons (2.5 ounces) unsalted butter, cut into tablespoons and at room temperature
1/4 cup light brown sugar
1/2 cup sugar
1/2 teaspoon vanilla

2 large eggs, room temperature
1/4 cup + 2 tablespoons sour cream, room temperature

1/3 cup cup milk (skim or regular), room temperature

Preheat the oven to 350 degrees F. with an oven rack in the middle of the oven. Line muffin pans with liners.

You can see that they sort of pop up and don't stay down in the cups.  Just give them a good shove from above, and let the sides pleat.  When you add the batter, they will stay down.
Place the chopped chocolate and the oil in a microwave-safe container. Micro-cook on medium (#5) for 1 minute. Stir and then reheat in 15-second increments on medium power until the chocolate is melted.

In a small bowl sift together the flour, cocoa, baking soda and salt. Set it aside.

In a mixer bowl, combine the butter and both sugars. Beat on medium speed for 3-5 minutes until the mixture is uniformly smooth and creamy, and well aerated. Beat in vanilla. Add the eggs, beating for 1 minute after the addition of each egg, and scraping down the bowl a few times.

On low, beat in the sour cream and chocolate. On low, in 4 additions, beat in the flour mixture alternately with the milk, starting and ending with the flour. (This is actually easier to do by hand, because the batter doesn't tend to separate when you do it by hand, but it does make the cake more tender when done by hand).

Spoon the batter into the muffin cups, using one spoon to scoop up the batter and the other to push the batter into the pans. Fill the cups 1/2 to 3/4 full.

Bake for 8-11 minutes for the minis, or 15-20 minutes for the full-size cupcakes, until a tester comes out clean. Set the tins on a wire rack until the cupcakes are cool, and then remove them from the pans.

The Filling
I used whipped cream to fill the cherry-topped cupcakes, and Simple Vanilla Buttercream for the ones that look like Hostess cupcakes.  The cream was easier to make, but the buttercream tasted far better. I've been making my buttercream a little thicker and sweeter lately, by adding a little powdered sugar to my basic recipe, but for this I wanted a filling that was very creamy - again so that it would be reminiscent of Hostess cupcakes. To do this, I used less than half of the powdered sugar as usual.

It’s ultra important that the butter be at the right temperature for this recipe to work, AND THE ROOM!  If the room is too hot, the buttercream will never form.  The room should be no warmer than 74 degrees - and colder is even better.

To get the butter the right temperature, cut it into tablespoons and let it stand on a cutting board until barely soft. Using your thumb, push down on each pat to flatten it into the board (it will still be very firm, and will split when you press down on it). In 3-5 minutes the butter should be ready. If you press down on it with your thumb, it should yield readily, but should not be soft and melty. If the butter is a little firm, it can always be beaten a little bit more, but if too soft, you’ll have to refrigerate it, and start over. I always aim for a little bit harder, rather than too soft.

2-1/2 sticks (20 tablespoons) unsalted butter, at cool room temperature
1 pound jar Marshmallow Fluff (this is a natural product containing only eggs, corn syrup and flavoring - so don't use another brand unless you check the ingredients)
1 teaspoon vanilla extract
2-3 tablespoons sifted powdered sugar
1-2 tablespoons corn syrup, to taste
2-3 tablespoons milk to soften the buttercream, optional

Now that the butter is at the proper temperature, scrape the butter into a mixing bowl and beat it until creamy (1 or 2 minutes.) Scrape down the bowl. Beat in the powdered sugar until fluffy. Add half of the Fluff, and beat on medium high until blended. Add the remaining Fluff, and continue to beat, on medium-high, for 2-5 minutes or until the frosting is fluffy and light and no longer marshmallowy.
This is what it should look like.

If the buttercream, does not form after beating for 5 minutes, place it in the refrigerator for 10 minutes, and then try and beat it again. After the buttercream forms, beat in the vanilla, corn syrup and milk, to taste.

If you put a coupler in the pastry bag before filling it, you'll be able to try tips to find the one that works best with the size cupcake you are making.  The piece on the left goes into the pastry bag, and then the tip gets put on, and the nut, in the center, keeps the pastry tip tight.

Choose the tip that fits the size of the cupcake  (I used Magic Tip #8 for filling, and Wilton #21 star for filling)

Stick the tip into the bottom or top of the cupcake, depending on how you finish them (if you plan to add chocolate icing instead of having the frosting come out of the top, fill from the bottom, otherwise you will see the dimple where the frosting went in.  It's easier to fill them from the top.  For one thing, you don't have to take them out of the wrappers, which give some support to the cupcake so it doesn't split as you fill it.  You can also feel when the cupcake is filled with the buttercream, and can stop before the cupcake starts to split.

You can see they look great with nothing more than some frosting coming out the top.  But they're also fantastic, and  look like mini Hostess cupcakes if you frost them with chocolate icing and vanilla icing decoration.

Chocolate Icing

My notes didn't say if the following recipe is  the right amount to frost all of the cupcakes (sorry - I either post it now, or you have  to wait another year until I make them again!)

3/4 cup whipping cream

8 ounces semisweet chocolate, chopped

2 cups powdered sugar

2 tablespoons hot water

Heat the cream in a small microwave-safe bowl for 30 seconds. Stir in the chocolate.  Let it stand for a minute and then stir.  If the chocolate isn't completely melted, heat in 10-second increments on power 5, stirring between each, until the chocolate melts completely and the mixture can be stirred into a smooth glaze.

Sift the powdered sugar into a small bowl. Stir the chocolate into the powdered sugar. Stir in half of the hot water.  The mixture should be thin enough to fall off of the spoon in a steady stream.  If it isn't, add the remaining hot water, 1/2 teaspoon at a time.

Dip the cupcakes into the glaze.  Turn the cupcakes right side up and let the glaze firm up a little.

 In the photo below you can see that I filled the cupcakes from the top, and I wasn't able to get the top level, so that the chocolate dips down  in the center.  You can add a decorative design, as I have here, to cover the dip, or you can add the vanilla glaze

Vanilla Glaze

1 cup  powdered sugar

1/2 teaspoon vanilla

2 tablespoons whipping cream

Sift the powdered sugar into a mixer bowl.  Whisk in the vanilla and the cream.  The glaze should be thick enough to pipe.  Add a little more sugar or cream, if necessary to get the proper texture.

For this amount of glaze, you'll need a very small piping bag.  You can make one out of a plastic storage or zip-top bag.  Cut the bag in half, horizontally.

Put the bag into a small glass, and then fill the bag

Hold the bag closed at the top, with the filled part resting in your palm, and your thumb and index finger holding the top (you can put a rubber band around the top if it is easier).  Gently squeeze the filling toward the tip.  Make a very tiny cut in the tip with scissors.  Pipe on the decoration, and then refrigerate until 30 minutes before serving.  

  

  





Cheese Blintzes with Berry Sauce

I thought it would be simple to put together a nice blintz recipe to put up in time for New Year's Day brunch.  But then again, somehow I forgot that I am a compulsive food nut!  I started with my original recipe which called for 3 eggs, 1 cup of skim milk, 1 cup of flour and a few other ingredients (we'll get to the filling in a minute).  These wrappers were good, but they weren't quite as sturdy as I would have liked them and the batter was just a tad heavy which made swirling the pan a little harder than necessary.  I had seen some recipes on the Internet that varied a bit, and so I proceded to make them again, and again, and again until I can barely stand the thought of blintzes (at least in the near future).  I tried adding more milk, using water instead of milk, adding melted butter, etc.  The ones made with water were flat tasting and didn't brown up enough.  The ones mades with less egg and more flour were tough and dry and stuck to the pan.  Finally I thought I would try adding a little more egg, and voila - I had the wrapper I was after.  As for the filling, you might see recipes that call for pot cheese, farmer's cheese, cottage cheese or ricotta.  Personally, I have never seen pot cheese in the store, and I knew that the farmer's cheese that we get here was totally wrong - it is a brick of cheese with a dense texture- not at all the right texture or taste (we don't get Friendship farmer's cheese, which I understand might be perfect).  Ricotta didn't work for me either because it contains vinegar, and the taste is all wrong.  After researching pot cheese and farmer's cheese I learned that traditionally, these are fresh milk cheeses that aren't readily available because they spoil fast, but that they are basically cottage cheese that has been drained so that the texture is drier and firmer (and that's what I had always used in the past).  I made my filling with a low fat cottage cheese, and also a full-fat cottage cheese, but the difference wasn't great, so I opted to stay with the lower fat cheese.  Don't forget that once you press out the liquid, the denser cheese is also denser in calories and most other nutritional elements.  Besides the type of cheese, there were instructions for processing the cheese, whipping the cheese, hand-beating the cheese or stirring it.  For my Light Jewish Holiday Dessert cookbook, I had made some lowfat blintzes, in which I had processed the filling.  I remembered that I didn't quite like the texture this made, but it hadn't made much difference for that book, because there was also an apple filling inside of the blintz.  But with just cheese,  I wanted this filling to be perfect.  I tried the processing method again, and also used the beater on another batch. Both of those methods created a cheese that was too thin. I decided to stir everything together by hand, pressing the cheese against the side of the bowl to make it a little smoother (I don't think for blintzes that you want a totally smooth filling).  I also used the filling at room temperature and one batch with refrigerated cheese and the difference was vast.  The ones with the room temperature  cheese were runny and grainy, while the chilled filling hung together nicely and remained creamy.  Even with the colder cheese, the filling wasn't as firm as I would have liked it.  I did some more experimenting adding more egg  and then egg and flour to the filling, and here again, the results were spectacular.  The filling with more egg and a little flour held on to its shape even after the blintzes were fried and warmed in the oven.  I'm sure that those of you who eat blintzes have a mental idea of what is perfect for you.  Now that you know the effects of these ingredients, techniques and temperatures you'll be able to tweak the recipe to create your own perfect version. By the way, the berry sauce was also an adventure (recipe follows). 
Happy New Year!

Makes 10 Blintzes

Blintz Batter
2 large pasteurized eggs
1/2 cup milk (skim to whole, your choice)
1/8 teaspoon salt
1 teaspoons sugar
1/2 cup (65 grams) all-purpose flour, measured by fluffing, scooping and levelling

Cheese Filling
2 pounds cottage cheese (brand matters - use one that tastes sweet and delicious to you!)
2 ounces light cream cheese, room temperature
2 tablespoons powdered sugar, or to taste
1/2 teaspoon vanilla extract
1 large pasteurized egg, whisked (instructions for regular eggs follow)

1 tablespoon all-purpose flour

2 tablespoons unsalted butter, for frying

Berry Topping
3 cups blackberries
3 cups raspberries
2 cups blueberries
1/3 -2/3 cup sugar, to taste
dash cinnamon, optional
1 teaspoon cornstarch,  optional

For the very best results, you'll want to make the filling far enough in advance so that it will be cold when you fill and fry the blintzes.   You can also make the wrappers a few days ahead, if you like.  If you want  the berries softer and sweeter, make them in advance, too.  At the very least, you want to make the berry topping at least 1-2 hours ahead of serving, especially if using blackberries, which have very firm center cores.

For the blintz batter, place the eggs,  milk, salt , and sugar  in a food processor bowl.  Process until well blended.  Add the flour, all at once.  Process for 5 seconds to blend the ingredients.  Scrape down the bowl and pulse for 3 more seconds to blend well.  Transfer the batter to a storage container.  Refrigerate for at least 1 hour, and up to 3 days.

To make the filling, you'll need to drain and press the moisture out of the cheese.  I've tried cheesecloth, the traditional method, but find it messy and inefficient.  I find that the easiest way to do this is in a knee-high stocking.  Cut off the top 3 inches of the stocking, and then put it in a tall glass with the top of the stocking cuffed over the top of the glass so that it will stay in place when you fill it with the cheese. 

 Hold the stocking over the sink with one hand, squeeze all of the filling towards the tip of the stocking. 

Continue to squeeze the cheese until the stuff coming out looks very thick or like curds are coming out.

The best way to get the cheese back out of the stocking is to put the stocking back into the glass, fold the top over the glass (as in the beginning), and then holding onto the stocking on the outside of the glass, turn the glass upside down over the bowl.  Shake the glass crisply and the cheese should start coming out of the stocking. Once it starts coming out, you can squeeze the stocking to help it along. 

You have now made pot cheese or farmer's cheese!  Add the cream cheese and press it against the sides of the bowl with a wooden spoon.  Once it is smoothly against the bowl, start mixing the cottage cheese and cream cheese together by mashing it against the side of the bowl.  The object is to mix the two together and to smooth out the cottage cheese a little - you are not aiming at a smooth filling - just one that is smooth enough to be pleasing on the tongue!  Stir in the remaining filling ingredients until well blended.  Transfer to a covered storage container, and refrigerate until cold or up to 1 day ahead.

Before starting the blintz wrappers (crepes),  have a piece of parchment paper near the stove onto which you will flip the crepes.  Remove the blintz batter from the refrigerator and stir it.  Heat a small nonstick pan over medium to high heat (depending on your stove and pan), until a droplet of water rolls around in the pan ( you can also use a carbon steel crepe pan, but you'll need to lightly butter it).  Ladle about 3 tablespoons of batter (a scant 1/4 cup) directly into the center of the pan.  Immediately pick up the pan and swirl the pan around and around so that the batter widens out  to fill the whole pan with batter.  By the time you do this, the crepe will almost be finished cooking.  Set it back down on the burner to finish cooking any spots that still look shiny.  As soon as the entire surface is dull, the crepe is done. 

To get the crepe out of the pan,  start the edge with a fork and then just turn the pan upside down over the parchment.  Once the edge is raised you'll be able to grab it and pull, and the whole crepe should come down onto the parchment paper.  You want this side of the crepe to be nicely browned, but not too brown or burned.  Adjust the burner accordingly.  On my heavy-duty gas range with an All-Clad pan, I start off medium-high and then need to turn it down to medium-low, but each stove will be different.

For my taste, the crepe on the left hand is too light, while the one on the right is just a bit too dark.  You can stack the crepes one on top of the other, and fill them as soon as they are all done, or cover them with wrap and refrigerator for several days before using.

Make the berry topping, sometime before you start filling the blintzes, either within 2 hours or ahead. 

In a small pot, combine 1 cup washed blackberries and 1 cup of washed blueberries**.  Place the remaining washed berries in a bowl.  Add 1 tablespoon sugar to the berries in the pot and 1/4 cup sugar to the berries in the bowl.  Let both sets stand for 10 minutes.  Mash the berries in the pot with a potato masher or fork. 
Place the cornstarch in a small bowl and stir in 2 teaspoons water.  Bring the berries to a boil, reduce the heat and let the mixture cook for 4 minutes.  Stir in the cornstarch mixture, bring it back to a simmer and let the mixture cook for 1 minute or until it goes from being cloudy to being clear. Let the cooked berries cool for 1 minute, and then strain them over the berries in the bowl.

Toss the berries with the cooked mixture until everything is well coated.  Set aside at room temperature for 1-2 hours, stirring occasionally, or transfer to a covered storage container and refrigerate until ready to serve (we like the berries at room temperature but you can eat them at any temperature you like).

 When ready to assemble the blintzes, preheat the oven to 200 degrees if you've used pasteurized eggs and to 300 degrees if you've used regular eggs in the filling.  Take the wrappers and cheese out of the refrigerator.  Set one wrapper on a piece of parchment or work surface with the browned side up.  Place about 2-1/2 tablespoons of the filling  on the crepe, just downward of the center in a mound that is about 1-inch x 3-inches. 

Most instructions call for folding over the bottom edge first and then the sides, but I think they are easier to make if the sides are folded in first, and then the bottom.  If done this way the crepe will stick to itself and you won't be fighting with it trying to get the sides to stay in.

Fold the bottom part over the filling and then continue to roll the blint up into a cylinder.

Add 1 tablespoon butter to a large frying pan (I use cast iron), and heat until the pan is hot and the butter has started to brown.  Add half of the blintzes to the frying pan  and cook for a few minutes on each side until they are brown on both sides.

Drain the blintzes on paper towels and then put them on a pan and set in the warm oven.  Repeat with the remaining blintzes.  If you have used pasteurized eggs in the filling, they won't need more than 5 minutes in the oven to warm them up.  You don't want the filling too hot or the blintzes will be hard to eat.  If you have used regular eggs, you want the filling to reach 160 degrees.  This should take 10-15 minutes in the oven.  Let them cool down before you eat them, or the filling will be unpleasantly hot.

Serve the warm blintzes with a bowl of sour cream and the berries.

**You can use any mix of berries that you like, but don't mash raspberries unless you are fond of the seeds.  Even if you strain them, lots of the raspbery seeds will get into the sauce (to strain raspberries you need a fine mesh strainer, a food mill or a chinois).  If you are using only blackberries, you can skip the heating process. Just mash 1/3 of the berries, add back into the  remaining sugared berries and let them macerate for 1-2 hours or overnight.

Enjoy the berry sauce on pancakes, waffles, blintzes, cottage cheese or ice cream.

Mushroom Barley Soup

I love soup  because it's so easy to make, doesn't really need fussing, measuring or gussying up - in other words, just the opposite of baking.  Especially when I've put all of my energy into making dessert and making it pretty, soup is just so easy!  And nothing is better on a cold winter evening, than a nice bowl of hearty soup.  My Dad, who loved to eat, didn't start cooking until later in life, after he and my mother both retired.  He, too was a great lover of soup.  This recipe is basically his with just a few minor changes and a fleshing out of the techniques.  He used equal portions of dried and fresh mushrooms, but I don't usually keep dried mushrooms around, and they can be hard to find.  I find that the cremini mushrooms are so tasty that the dried ones are not needed.  If you do decide to use some dried mushrooms, soak them in hot water, drain them reserving the liquid and then strain the liquid into the soup

Serves 6

1 tablespoon mild oil, divided
3/4 cup cremini mushrooms, washed, dried and chopped
1/4 Vidalia onion, skin removed, and chopped into 1/4-inch pieces
1 celery stalk, diced
2 carrots, peeled and diced
4 cups low-sodium chicken stock
4 cups low-sodium beef stock
1/2 cup pearl barley
1 cup non-fat half & half
salt and pepper to taste

Add the 2 teaspoons oil to a large stockpot.  Heat on high, and when the oil is hot, add the mushrooms, and saute until brown.

Reduce the heat, add the remaining oil, onions, celery and carrots, and cook for about 5 minutes, until the onions are translucent but not brown.  Add the stock and the barley.  Cover the pot and simmer for 1-1/2 hours.

You can leave the soup as it is, but I like to puree a few ladlefuls , which makes the texture more pleasant to me, and also thickens the soup.  I use a slotted spoon to transfer about a cup or two of veggies and barley to the processor, and then I process it until it is not quite smooth.  After it is ground up pretty well, you can add a little of the broth to help get it pureed.  Once it has the texture you like, scrape it back into the soup.  Stir in the half & half, bring back to a simmer, and serve.  Soup almost always thickens overnight.  If you want it more liquidy when you reheat it, add more half & half or puree some more of the veggies.

HAPPY HOLIDAYS!!